Figure 17: Location of SRX100 Services Gateway Serial Number and Agency
Labels
Related
Documentation
Return Procedure for the SRX100 Services Gateway on page 108
•
•
Contacting Customer Support on page 107
Packing the SRX100 Services Gateway and Components for Shipment
This topic describes how to pack the services gateway or components for shipment.
Packing the Services Gateway for Shipment
To pack the services gateway for shipment:
1.
Retrieve the shipping carton and packing materials in which the device was originally
shipped. If you do not have these materials, contact your Juniper Networks
representative about approved packaging materials.
2.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect
the strap to the ESD point on the chassis or to an outside ESD point if the device is
disconnected from earth ground.
3.
On the console or other management device connected to the services gateway, enter
CLI operational mode and issue the following command to shut down the services
gateway software:
user@host> request system power-off
Wait until a message appears on the console confirming that the operating system
has halted.
Copyright © 2015, Juniper Networks, Inc.
110
SRX100 Services Gateway Hardware Guide for B and H Model Numbers
