Juniper NSM4000, Hardware Manual

Page: 87 / 196

Deleting a RADIUS Server
To delete a RADIUS server:
1.
Select
System Administration
>
RADIUS Management
. The RADIUS Servers dialog box
appears listing the RADIUS servers that have been added.
2.
Select the check box next to the name of the server you want to delete, and click
Delete Selected.
NOTE: You need System Administration permissions to delete RADIUS
servers.
Editing RADIUS Server Parameters
To edit the parameters of a RADIUS server:
1.
Select System Administration > RADIUS Management. The RADIUS Servers dialog
box appears listing the RADIUS Servers that have been added.
2.
Select the name of the server whose properties you want to edit. The Edit RADIUS
Server dialog box appears. See
Figure 33 on page 73 .
Figure 33: Edit RADIUS Server Dialog Box
3.
Edit the parameters you want to change and click
Save
.
Monitoring with SNMP
You can configure your NSM4000 appliance for SNMP monitoring from a network
operations server. The server can then issue periodic SNMP Get instructions to return the
status of the NSM4000 appliance.
You configure SNMP on the NSM4000 appliances with access credentials for either
SNMP v2c or SNMP v3. NSM4000 appliances support read-only access to the System
Descriptor (sysDescr) and Host Resource MIB.
73 Copyright © 2016, Juniper Networks, Inc.
Chapter 9: Configuring NSM from the Web Interface