Juniper NSM4000, Hardware Manual

Page: 28 / 196

Table 7: NSM4000 Appliance FRUs (continued)
Type FRU
Hot-swappable Hard disks
Related
Documentation
Unpacking the NSM4000 Appliance on page 29
•
•
Installing and Removing NSM4000 Appliance Hardware Components on page 111
•
Front Panel of an NSM4000 Appliance on page 4
•
Rear Panel of an NSM4000 Appliance on page 6
AC Power Cord Specifications for the NSM4000 Appliance
The NSM4000 appliance is shipped with an AC power supply module already installed.
A power cord suitable for your region is shipped along with the NSM4000 appliance.
The coupler is type C13 as described by International Electrotechnical Commission (IEC)
standard 60320. The plug at the male end of the power cord fits into the power source
outlet that is standard for your geographical location.
CAUTION: The AC power cord provided with each power supply module is
intended only for use with that power supply module and not for any other
use.
NOTE: In North America, AC power cords must not exceed 4.5 meters
(approximately 14.76 feet) in length to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the appliance are in
compliance.
Table 8 on page 14 lists AC power cord specifications provided for each country or region.
Table 8: AC Power Cord Specifications
Juniper Model
Number
Plug Standards
Electrical
Specifications Country or
Region
CBL-GP-JX-PWR-AU AS/NZZS 3112-1993
Type SAA/3 250 VAC, 10 A, 50 Hz Australia
CBL-GP-JX-PWR-CH GB 1002-1996 Type
PRC/3 250 VAC, 10 A, 50 Hz China
Copyright © 2016, Juniper Networks, Inc. 14
NSM4000 Appliance Hardware Guide