Juniper NSM4000, Hardware Manual

Page: 149 / 196

CHAPTER 14
General Safety Information
• General Safety Guidelines and Warnings on page 135
• Definitions of Safety Warning Levels on page 136
•
Fire Safety Requirements on page 138
•
Qualified Personnel Warning on page 139
• Warning Statement for Norway and Sweden on page 140
General Safety Guidelines and Warnings
The following guidelines help ensure your safety and protect the appliance from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so we recommend that you be alert and exercise good judgment at all
times.
•
Perform only the procedures explicitly described in the hardware documentation for
this product. Make sure that only authorized service personnel perform other system
services.
• Keep the area around the chassis clear and free from dust before, during, and after
installation.
•
Keep tools away from areas where people could trip over them while walking.
• Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which can get
caught in the chassis.
•
Wear safety glasses if you are working under any conditions that could be hazardous
to your eyes.
• Do not perform any actions that create a potential hazard to people or make the
equipment unsafe.
•
Never attempt to lift an object that is too heavy for one person to handle.
•
Never install or manipulate wiring during electrical storms.
• Never install electrical jacks in wet locations unless the jacks are specifically designed
for wet environments.
•
Operate the appliance only when it is properly grounded.
135 Copyright © 2016, Juniper Networks, Inc.