Juniper NSM4000, Hardware Manual

Page: 75 / 196

You have three options for saving changes:
•
At the prompt, enter one of the following menu options:
•
A to apply all the new changes.
• M to make more changes before configuring the regional server.
• C to cancel all new changes and quit the NSM4000 appliance setup program. After
you cancel a change, the Change Apply submenu reappears.
•
Enter the number next to a displayed change to cancel only the selected change.
•
Highlight one of the options you modified and delete it.
Related
Documentation
Navigating the Menus on page 55
•
•
Setting Up Your NSM4000 Appliance on page 42
•
Configuring a Regional Server on page 45
Installing the Patch for the NSM4000 License Key File
This section describes the procedure for installing the patch for the NSM4000 license
key file.
The serial number of the NSM4000 appliance has a new format. In the 2012.2R7, 2012.2R8
and 2012.2R9 releases, you need to install a patch that enables NSM to identify the new
format of the NSM4000 appliance serial number.
NOTE: You need not install the licensing patch for NSM2012.2R10 and later
versions because this issue is addressed in these releases.
To install the patch for the NSM4000 license key file:
1.
At the console login prompt, enter the sudo su- command to log in to the appliance
as a root user.
2.
Enter the admin password.
3.
Enter the
/etc/init.d/guiSvr stop
command to stop the GUI server.
4.
Enter the
cp <Jar_file_name> /usr/netscreen/GuiSvr/lib/classes/
command to copy
the patch to
/usr/netscreen/GuiSvr/lib/classes/
.
5.
Enter the
chown nsm:nsm <Jar_file_name>
command to change the patch ownership
to NSM.
6.
Enter the vi /usr/netscreen/GuiSvr/bin/.guiSvrLicenseManager command to add a
patch entry to the .guiSvrLicenseManager file available at /usr/netscreen/GuiSvr/bin .
The console prompt displays the following output after the .guiSvrLicenseManager
file has been modified:
61 Copyright © 2016, Juniper Networks, Inc.
Chapter 8: Configuring NSM from the CLI