Known Behavior
13
Release 10.0.3
If the router is under a heavy load, the
show profile
command might take
longer than usual to execute.
Work-around:
You can either delay examination of profiles until the router is
less busy, or save a copy of the profile to a text file off the router.
CLI
In Interface Configuration mode for a major interface, the CLI displays options
for protocols that are not supported by that interface type.
When you issue the
reload
command on an ERX310 router, the command
might display a warning message that erroneously indicates that a
synchronizing operation will be performed. Any references to synchronization
that appear in command output or system messages do not apply to the
ERX310 router, which does not support SRP module redundancy.
The following commands have been deprecated in the JUNOSe Software and
might be removed completely in a future release. If a command has been
deprecated for only a particular command mode, the table specifies any modes
for which it is still available.
Deprecated Command
Command Mode
Preferred Command
aaa accounting interval
Global Configuration
aaa service accounting
interval and
aaa user accounting interval
cablelength short
Controller Configuration
clock rate
Interface Configuration
channel-group description
Controller Configuration
channel-group shutdown
Controller Configuration
channel-group snmp trap link-status Controller Configuration
channel-group timeslots
Controller Configuration
classifier-list
Global Configuration
ip classifier-list
color
Policy List Configuration
color in Classifier Group
Configuration mode
controller e1
Global Configuration
controller t1
Global Configuration
description
Interface Configuration
Still available in Controller
Configuration and VRF
Configuration modes
ip description
fdl
Controller Configuration
fdl carrier
Controller Configuration
fdl string
Controller Configuration
fdl transmit
Controller Configuration
filter
Policy List Configuration
filter in Classifier Group
Configuration mode
