SRC Software and SDX Software Compatibility Matrix
11
Release 10.0.3
Security Protocols
Internet Key Exchange (IKE)
Internet Security Association and Key Management Protocol (ISAKMP)
IP Authentication Header (AH)
IP Encapsulating Security Payload (ESP)
Network Address Translation (NAT)
SRC Software and SDX Software Compatibility Matrix
The SRC software offers the features of the SDX software on the C Series
Controllers, a range of hardware platforms that use the Linux operating system. In
contrast, the SDX software runs on Solaris workstations. The SRC software contains
the features found in the associated SDX release plus additional features described
in the
SRC Release Notes
.
The following table shows which versions of the SRC software and SDX software
are compatible with specified versions of the JUNOSe Software.
For more detailed information about SRC software and SDX software compatibility
with JUNOSe releases, see the
SRC Release Notes
.
Known Behavior
This section briefly describes E Series router behavior and related issues. In some
cases the behavior differs from non–E Series implementations; in others the
behavior is included to emphasize how the router works.
AAA
Although you can use the
max-sessions
command to configure a maximum of
32,000 outstanding authentication/authorization requests to a RADIUS server,
AAA internal limits prevent the actual number of outstanding
authentication/authorization requests from exceeding 9600. These internal
AAA limits apply only to authentication/authorization requests and not to
accounting requests.
The JUNOSe Software does not support accounting for ATM 1483 subscribers.
The
atm1483
keyword for the
aaa accounting default
command is present in
the CLI, but it is not supported.
SRC Software Release
SDX Software Release
Tested with JUNOSe Release
2.0.0
7.1.0
8.1.2, 8.2.2
2.1.0
Not applicable
9.1.0p0-1
3.0.0
Not applicable
9.0.0, 9.0.1, 9.1.1
3.1.0
Not applicable
9.2.0, 9.3.0, 10.0.0
