manualshive.com logo in svg

Juniper JUNOSe 10.0.3, Release Note

Share
Download
Juniper JUNOSe 10.0.3 Release Note Download Page 5

Table of Contents

„

v

Table of Contents

Release 10.0.3

1

Release Installation .......................................................................................... 1

Upgrading to Release 5.3.0 or a Higher-Numbered Release ....................... 1
Upgrading from Release 5.1.1 or Lower-Numbered Releases to 

Release 6.x.x or Higher-Numbered Releases ....................................... 2

Moving Line Modules Between Releases .................................................... 2
SRP Module Memory Requirements .......................................................... 3
Hardware and Software Compatibility ....................................................... 3

Requesting Technical Support  ......................................................................... 3

Self-Help Online Tools and Resources........................................................ 4
Opening a Case with JTAC ......................................................................... 4

Release Overview............................................................................................. 5

Before You Start ........................................................................................ 5

Release Highlights ............................................................................................ 7
Early Field Trial Features.................................................................................. 7

DHCP ........................................................................................................ 7
Unified ISSU .............................................................................................. 8

Unsupported Features ...................................................................................... 8

E120 Router and E320 Router ................................................................... 8
Multicast .................................................................................................... 8
Policy Management ................................................................................... 9
Stateful SRP Switchover (High Availability) ................................................ 9

Release Software Protocols .............................................................................. 9

Core Routing Stack .................................................................................... 9
Network Management Protocols................................................................ 9
Routing Protocols ...................................................................................... 9
Multiprotocol Label Switching (MPLS) ...................................................... 10
Layer 2 Protocols..................................................................................... 10
Security Protocols .................................................................................... 11

SRC Software and SDX Software Compatibility Matrix ................................... 11
Known Behavior ............................................................................................ 11

AAA ......................................................................................................... 11
ATM......................................................................................................... 12
BGP ......................................................................................................... 12
BGP/MPLS VPNs ...................................................................................... 12
B-RAS ...................................................................................................... 12
CLI........................................................................................................... 13
DHCP ...................................................................................................... 16
DHCP External Server.............................................................................. 17
Dynamic Interfaces ................................................................................. 18
Ethernet .................................................................................................. 19
Flash........................................................................................................ 20
Forwarding .............................................................................................. 20
GRE ......................................................................................................... 20

Summary of Contents for JUNOSe 10.0.3



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands