Juniper EX3300, Hardware Manual, Page: 68 / 272

Table 29: Chassis Viewer for EX8216 Switches
Description Field
Front View
In the image, click any line card or RE module to display the front view of the selected component.
In the image, the colors listed below denote the interface status:
• Green—Interface is up and operational.
• Yellow—Interface is up but is nonoperational.
• Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
You can view status for the following ports on the RE module:
• USB port—Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for your
EX Series switch.
• Auxiliary port—This port is unavailable.
• Management (
me0
) port—The management port is used to connect the switch to a management
device for out-of-band management.
• Console port—The console port is used to connect the switch to a management host such as a
PC or a laptop. (You might do this for initial switch configuration.)
Interface status
Slots on the switch are labeled, from the top of the switch down:
•
RE0 (RE module)
• RE1 (RE module)
•
0–15 (line cards)
Slot numbers
The active slots contain a gray temperature icon. Mouse over the icon to display temperature
information for the slot. Temperature
Mouse over the fan tray icon to display consolidated information about the fans. Fan status
Mouse over the power supply icons to display name, status, and description information. Power supplies
LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display. LCD panel
Rear View
Mouse over the SF module icons in their respective slots to display information. Slots are numbered
SF7–SF0, from left to right. SF modules
Table 30: Chassis Viewer for XRE200 External Routing Engines
Description Field
Front View
Copyright © 2016, Juniper Networks, Inc. 46
EX3300 Switch Hardware Guide