Juniper EX3300, Hardware Manual, Page: 154 / 272

for connecting a switch to earth ground. Before you begin connecting a switch to earth
ground, ensure you have the parts and tools required for your switch.
Table 54: Parts and Tools Required for Connecting an EX Series Switch to Earth Ground
Additional
Information
Screwdriver
Screws and
Washers Grounding Lug
Specifications Grounding Cable
Requirements
Earthing
Terminal
Location
Switch
Phillips (+)
number 2
• Two 10-32 x .25 in.
screws with #10
split-lock washer—
not provided
• Two #10 flat
washers—not
provided
Panduit
LCC10-14BWL or
equivalent—
not provided 14 AWG (2 mm²),
minimum 90°C
wire, or as
permitted by the
local code Rear panel
of the
chassis EX2200
Phillips (+)
number 2
• Two 10-32 x .25 in.
screws with #10
split-lock washer—
not provided
•
Two #10 flat
washers—not
provided
Panduit
LCC10-14BWL or
equivalent—
not provided 14 AWG (2 mm²),
minimum 90°C
wire, or as
permitted by the
local code Rear panel
of the
chassis EX2300-C
Phillips (+)
number 2
• Two 10-32 x .25 in.
screws with #10
split-lock washer—
not provided
• Two #10 flat
washers—not
provided
Panduit
LCC10-14BWL or
equivalent—
not provided 14 AWG (2 mm²),
minimum 90°C
wire, or as
permitted by the
local code Rear panel
of the
chassis EX2300
See “Special
Instructions
to Follow
Before
Connecting
Earth Ground
to a Switch”
on page 134
.
Phillips (+)
number 2
• Two 10-32 x .25 in.
screws with #10
split-lock washer—
not provided
• Two #10 flat
washers—
not provided
Panduit
LCC10-14BWL or
equivalent—
not provided 14 AWG (2 mm²),
minimum 90°C
wire, or as
permitted by the
local code Rear panel
of the
chassis EX3200
Phillips (+)
number 2
•
Two 10-32 x .25 in.
screws with #10
split-lock washer—
not provided
• Two #10 flat
washers—
not provided
Panduit
LCC10-14BWL or
equivalent—
not provided 14 AWG (2 mm²),
minimum 90°C
wire, or as
permitted by the
local code Rear panel
of the
chassis EX3300
Phillips (+)
number 2
• Two 10-32 x .25 in.
screws with #10
split-lock washer—
not provided
• Two #10 flat
washers—not
provided
Panduit
LCC10-14BWL or
equivalent—
not provided 14 AWG (2 mm²),
minimum 90°C
wire, or as
permitted by the
local code Rear panel
of the
chassis EX3400
Copyright © 2016, Juniper Networks, Inc. 132
EX3300 Switch Hardware Guide