Juniper EX3300 Hardware Manual Download Page 37

Page: 37 / 272

Table 6: LCD Panel Menu Options

(continued)

Description

The Status menu has the following options:

•

Show VCP status—Choose one of the following:

•

Press the

Enter

button to display the Virtual Chassis port (VCP) status: Up, Down, Disabled.

NOTE:

This option is available only for an EX3300 switch that is a member of a Virtual Chassis

configuration.

•

Press the

button to go to the next option in the Status menu.

•

Show PSU status—Choose one of the following:

•

Press the

Enter

button to display the status of the power supply: OK, Failed, Absent.

•

Press the

button to go to the next option in the Status menu.

•

Show Environment status—Choose one of the following:

•

Press the

Enter

button to display the status of the fan and temperature:

•

Fan status: OK, Failed, Absent

•

Temp status: OK, High, Shutdown

•

Press the

button to go to the next option in the Status menu.

•

Show Junos version—Choose one of the following:

•

Press the

Enter

button to display the version of Junos OS for EX Series switches loaded on the switch.

•

Press the

button to go to the next option in the Status menu.

•

EXIT STAT MENU?—Choose one of the following:

•

Press the

Enter

button to exit the Status menu. Then press the

button to go to the Maintenance

menu.

•

On an EX3300 switch that is a member of a Virtual Chassis configuration, press the

button to return

to the Show VCP status option.

NOTE:

This option is available only for an EX3300 switch that is a member of a Virtual Chassis

configuration.

If you do not want users to use Status menu options, disable the entire menu or individual menu options. See

“Configuring the LCD Panel on EX Series Switches (CLI Procedure)” on page 160

STATUS

Chapter 2: Chassis Components and Descriptions

Summary of Contents for EX3300





















































































































































































































































Search results

Summary of Contents for EX3300

Reviews:

Juniper EX3300, Hardware Manual, Page: 37 / 272

Search results

Summary of Contents for EX3300

Reviews: