Juniper ACX2000, Hardware Manual

Page: 26 / 190

Protocols and Applications Supported by ACX Series Routers
Table 5 on page 26 contains the first Junos OS Release support for protocols and applications on ACX
Series routers. A dash indicates that the protocol or application is not supported.
NOTE:
•
The [edit logical-systems logical-system-name] hierarchy level is not supported on ACX Series
routers.
•
The ACX Series routers does not support per-family maximum transmission unit (MTU)
configuration. The MTU applied to family inet gets applied to other families as well, even
though it can be configured though CLI and visible in show interface extensive output. The
only way to use higher MTU for a family is to manipulate the MTU, apply at interface or family
inet levels, and let it calculate for each family automatically. MTU values are not limited to
1500 but can range between 256 to 9216.
For more information, see the Knowledge Base (KB) article KB28179 at:
https://kb.juniper.net/InfoCenter/index?page=content&id=KB28179 .
Table 5: Protocols and Applications Supported by ACX Series Routers
ACX5448 ACX500 ACX5096 ACX5048 ACX4000 ACX2200 ACX2100 ACX2000 ACX1100 ACX1000
Protocol or
Application
Interface and Encapsulation Types
18.2R1 12.3X54
–D20
(Indoor)
12.3X54
–D25
(Outdoor)
15.1X54
–D20
15.1X54
–D20
12.3x51
-D10
12.3X54
–D15
12.2R2 12.2 12.2R2 12.2 Ethernet interfaces—1G,
10G
18.2R1 – 15.1X54
–D20
15.1X54
–D20
– – – – – – Ethernet interfaces—40G
– – – – – – 12.2R2 12.2 – 12.2 ATM interfaces (IMA
only)
– – – – – – 12.2R2 12.2 – 12.2 E1 interfaces
– – – – – – 12.2R2 12.2 – 12.2 T1 interfaces
26