Juniper ACX2000 Hardware Manual Download

Page: 17 / 190

ACX2000 and ACX2100 System Overview

IN THIS SECTION

ACX2000 and ACX2100 Universal Metro Router Overview | 17

ACX2000 and ACX2100 Routers Hardware and CLI Terminology Mapping | 20

Packet Flow on ACX Series Routers | 24

Protocols and Applications Supported by ACX Series Routers | 26

ACX2000 and ACX2100 Universal Metro Router Overview

IN THIS SECTION

Benefits of the ACX2000 and ACX2100 Routers | 18

ACX2000 Router Description | 18

ACX2100 Router Description | 19

The ACX2000 and ACX2100 Universal Metro Routers are principally designed to provide superior

management for rapid provisioning to the access network. The ACX Series routers support rich Gigabit

Ethernet and 10-Gigabit Ethernet capabilities for uplink, along with support for legacy interfaces and

Gigabit Ethernet interfaces for radio and NodeB connectivity in a compact form factor that is

environmentally hardened and passively cooled. Seamless, end-to-end MPLS can be used to address legacy

and emerging requirements to provide the foundation for a converged network that utilizes the same

mobile backhaul infrastructure for business or residential services.

The ACX Series router is a single-board router with a built-in Routing Engine and one Packet Forwarding

Engine. Because there is no switching fabric, the single Packet Forwarding Engine takes care of both ingress

and egress packet forwarding:

•

Routing Engine—Provides Layer 3 routing services and network management.

•

Packet Forwarding Engine—Performs Layer 2 and Layer 3 packet switching, route lookups, and packet

forwarding.

Summary of Contents for ACX2000































































































































































































Search results

Summary of Contents for ACX2000

Reviews:

Related manuals for ACX2000

Brands by name

Popular brands

Juniper ACX2000, Hardware Manual

Search results

Summary of Contents for ACX2000

Reviews:

Related manuals for ACX2000

Brands by name

Popular brands