Juniper ACX2000 Hardware Manual Download Page 58

Page: 58 / 190

Table 12: System LED on the Front Panel

Description

State

Color

Label

Router is transitioning online.

Blinking

Green

SYS

Router is functioning normally.

steadily

Router has reported an alarm.

Blinking

Red

Router has failed.

steadily

T1/E1 Port LEDs

The front panel has sixteen T1/E1 ports, each with one pair of port LEDs.

Table 13 on page 58

describes

the LEDs in more detail.

Table 13: T1/E1 Port LEDs

Description

Color

Location

Name

Online with no alarms or failures.

Green

Left

Link

Active with a local alarm; router has detected a failure.

Red

Not enabled.

–

Online with alarms for remote failures.

Yellow

Right

Link

(remote

alarms)

Ethernet Port LEDs

The front panel of the ACX2000 router has six Gigabit Ethernet RJ-45 ports, and the ACX2100 router has

eight Gigabit Ethernet RJ-45 ports, each with one pair of port LEDs.

Table 14 on page 59

describes the

LEDs in more detail.

Summary of Contents for ACX2000































































































































































































Search results

Summary of Contents for ACX2000

Reviews:

Brands by name

Popular brands

Juniper ACX2000, Hardware Manual

Search results

Summary of Contents for ACX2000

Reviews:

Brands by name

Popular brands