Juniper 4VETJ, User Manual, Page: 66 / 75

62
4VetJ Ultrasound Scanner User’s Manual
In compliance with the FCC rules, 47 CFR 15.105(b), the
user must be notified that this equipment has been tested
and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
„
Reorient or relocate the receiving antenna.
„
Increase the separation between the equipment and
receiver.
„
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
„
Consult the dealer or an experienced radio/TV
technician for help.
In compliance with the FCC rules, 47 CFR 15.21, the user
must be notified that changes or modifications to the 4VetJ
that are not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
Only approved accessories may be used with this
equipment. In general, all cables must be high quality,
shielded, correctly terminated, and normally restricted
to two meters in length. Wall chargers approved for
this product employ special provisions to avoid radio
interference and should not be altered or substituted.
Radio Frequency Safety
This equipment complies with radiation exposure limits set
forth for an uncontrolled environment. This transmitter must
not be co-located or operating in conjunction with any
other antenna or transmitter.