Juniper 4VETJ User Manual Download Page 65

Page: 65 / 75

Appendix C Warnings, Regulatory Information, and Licensing

AC Power Supply

To reduce the risk of personal injury, electrical shock, fire or

damage to the equipment, follow this information:
Only use the power supply provided with the 4VetJ. Using

other power supplies could be a fire hazard as well as

damage the device and void the warranty.
Plug the AC power supply into an electrical outlet that is

properly grounded and easily accessible at all times.
Do not place anything on the AC power supply or any

of the other cables. Arrange them so that no one can

accidentally step on or trip over them.
Do not pull on a cord or cable. When unplugging the wall

charger from the electrical outlet, pull on the plug, not the

cord.
There are no user serviceable parts inside.
The input power plug is the disconnect device to remove

power.
This product is intended for continuous operation.
This product is not suitable for operation in the presence of

a flammable anesthetic mixture with air or with oxygen or

with nitrous oxide.
This product is not protected against the ingress of water.
To clean and disinfect the unit, wipe the surface with a cloth

slightly dampened with mild detergent or normal hospital

bactericides. Do not immerse the unit. Do not clean the unit

with isopropyl alcohol or other solvents.

Certifications and Standards

United States

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

The device may not cause harmful interference.

This device must accept any interference received,

including interference that may cause undesired

operation.

Summary of Contents for 4VETJ












































































Search results

Summary of Contents for 4VETJ

Reviews:

Juniper 4VETJ, User Manual, Page: 65 / 75

Search results

Summary of Contents for 4VETJ

Reviews: