Juniper 4VETJ, User Manual, Page: 54 / 75

50
4VetJ Ultrasound Scanner User’s Manual
Clean, Store, Transport, and Recycle
Follow the instructions in this chapter to properly clean,
store, transport, and recycle the 4VetJ and components.
Clean and Disinfect
The 4VetJ and probe should be cleaned and disinfected
before each use and before they are stored, transported,
or sent to our service department for servicing or repairs.
They can get contaminated while being used, including by
infectious agents.
CAUTION: The 4VetJ is not waterproof. During wet cleaning
and disinfecting, be cautious and pay special attention to
openings like the connector and battery charging ports
and the probe socket. The device should be powered
off and unplugged during a thorough cleaning and
disinfecting. Use an agent approved to disinfect medical
devices. The personnel performing disinfection on the
equipment should wear protective gloves and clothes.
4VetJ Ultrasound Scanner
Clean the body of the 4VetJ after use with a soft cloth or a
paper towel using warm water or a mild cleaning solution to
avoid mechanical damage.
The surface of the device should be disinfected with an
agent approved to disinfect medical devices. Foam or
spray agents are recommended,
After wet cleaning or disinfecting of the 4VetJ, dry it with a
soft cloth.
Touchscreen
When you clean or disinfect the touchscreen, it is important
to use substances that will not damage the surface of the
screen. Use a soft cloth and avoid rubbing it with anything
abrasive that could scratch it.
!