Jungheinrich ERE 224, Operating Instructions Manual

Page: 31 / 87

1003
.GB
E 2
2 Description of the operating controls and displays
Item Operating control or display Function
1 Hinged standing platform
t
Pedestrian-controlled operation:
– Driver standing platform in folded-up position:
Truck travelling speed is limited to 4.5 km/h.
Stand-on operating mode, standing platform
serves as the deadman switch:
– Unweighted driver standing platform in folded-up
position:
Travelling function blocked.
– Driver standing platform in folded-down position,
with driver standing on it:
Travelling function released.
2 Hinged safety extensions
t
The travelling function is blocked if the safety ex-
tensions are not folded out when the standing plat-
form is folded down:
Truck travelling speed is limited to 4.5 km/h.
3 Master switch
(emergency cut-out)
t
The electric circuit is interrupted, all electrically
controlled functions are switched off and the truck
is automatically braked.
4 Anti-collision key
t
Pedestrian-controlled operation:
Safety function which, when operated, will force
the truck for approx. 5 seconds in the opposite trav-
elling direction (R) and which will then switch off
the travelling function until the controller has been
briefly moved to its neutral position.
Stand-on operating mode:
without function
5 Controller
t
Controls the direction of travel as well as the trav-
elling speed (refer to section 4.2).
6 Display instrument
(CANDIS)
o
Operating hours meter
Battery capacity display
Shows the residual capacity of the battery and the
accumulated operating hours of the truck
7 Key switch
t
Switches the control current on and off. The truck
cannot be operated by unauthorised persons when
the key has been removed from the switch.
8 Keyboard
(CANCODE)
o
Code settings
Drive programme release
9 Control shaft
t
Movable control shaft.
Steering and braking:
– Swivelling the control shaft into the braking
range (B):
The truck is mechanically braked.
– Swivelling the control shaft into the driving range
(F):
This releases the brake so that the truck can be
moved.
t
=
Standard equipment
o
= Optional equipment
1003
.GB
E 2
2 Description of the operating controls and displays
Item Operating control or display Function
1 Hinged standing platform
t
Pedestrian-controlled operation:
– Driver standing platform in folded-up position:
Truck travelling speed is limited to 4.5 km/h.
Stand-on operating mode, standing platform
serves as the deadman switch:
– Unweighted driver standing platform in folded-up
position:
Travelling function blocked.
– Driver standing platform in folded-down position,
with driver standing on it:
Travelling function released.
2 Hinged safety extensions
t
The travelling function is blocked if the safety ex-
tensions are not folded out when the standing plat-
form is folded down:
Truck travelling speed is limited to 4.5 km/h.
3 Master switch
(emergency cut-out)
t
The electric circuit is interrupted, all electrically
controlled functions are switched off and the truck
is automatically braked.
4 Anti-collision key
t
Pedestrian-controlled operation:
Safety function which, when operated, will force
the truck for approx. 5 seconds in the opposite trav-
elling direction (R) and which will then switch off
the travelling function until the controller has been
briefly moved to its neutral position.
Stand-on operating mode:
without function
5 Controller
t
Controls the direction of travel as well as the trav-
elling speed (refer to section 4.2).
6 Display instrument
(CANDIS)
o
Operating hours meter
Battery capacity display
Shows the residual capacity of the battery and the
accumulated operating hours of the truck
7 Key switch
t
Switches the control current on and off. The truck
cannot be operated by unauthorised persons when
the key has been removed from the switch.
8 Keyboard
(CANCODE)
o
Code settings
Drive programme release
9 Control shaft
t
Movable control shaft.
Steering and braking:
– Swivelling the control shaft into the braking
range (B):
The truck is mechanically braked.
– Swivelling the control shaft into the driving range
(F):
This releases the brake so that the truck can be
moved.
t
=
Standard equipment
o
= Optional equipment