Jungheinrich ERE 224, Operating Instructions Manual

Page: 27 / 87

1003
.GB
D 4
4 Charging the battery
– Park the truck and render it safe (refer to chapter E).
F
Do not connect or disconnect the battery connector and the socket unless the truck
is switched off.
– Expose the battery (refer to section 3).
F
During the recharging operation, the tops of the battery cells must be exposed to en-
sure adequate ventilation. No metal objects must be placed on the battery. Prior to
starting the recharging operation, check all cable connections and plugged connec-
tions for visible damage.
All safety instructions as provided by the supplier of the battery and the charging sta-
tion must be strictly observed.
– Disconnect the battery connector (8).
– If present, remove any insulating mats from the battery.
– Connect the charging cable (9) to the battery connector (8) and switch on the bat-
tery charger.
M
Recharge the battery observing the instructions provided by the battery supplier and
by the charging station supplier.
8
9
1003
.GB
D 4
4 Charging the battery
– Park the truck and render it safe (refer to chapter E).
F
Do not connect or disconnect the battery connector and the socket unless the truck
is switched off.
– Expose the battery (refer to section 3).
F
During the recharging operation, the tops of the battery cells must be exposed to en-
sure adequate ventilation. No metal objects must be placed on the battery. Prior to
starting the recharging operation, check all cable connections and plugged connec-
tions for visible damage.
All safety instructions as provided by the supplier of the battery and the charging sta-
tion must be strictly observed.
– Disconnect the battery connector (8).
– If present, remove any insulating mats from the battery.
– Connect the charging cable (9) to the battery connector (8) and switch on the bat-
tery charger.
M
Recharge the battery observing the instructions provided by the battery supplier and
by the charging station supplier.
8
9