Jungheinrich EJC 14, Operating Instructions Manual

Page: 28 / 55

D 7
040
1.G
B
5 Removing and installing the battery
– Expose the battery (refer to section 3).
f
The truck must stand horizontally. Batteries with exposed terminals or connectors
must be covered with a rubber mat to prevent short-circuits. Place battery connector
and battery cable in such a way that they do not get caught within the truck interior
when the battery is pulled out.
f
When replacing batteries, ensure that a battery of the same type is fitted. Supplemen-
tary weights may not be removed or changed in their position.
f
After reinstallation of the battery, visually check all leads and connectors for damage.
Before commissioning the truck, the battery hood must be properly closed.
A
When changing the battery with the aid of a lifting gear, ensure that the lifting gear is
of adequate capacity (the battery weight is indicated on the battery identification plate
at the battery trough). The battery must be lifted vertically to prevent crushing of the
battery trough. The hooks are to be attached to the battery hoisting ears (9) that they
cannot fall onto the battery cells when the hoisting gear is released.
5.1 Remove battery by lifting it upwards (truck without wheel-arm lifting device)
– Withdraw the battery connector.
– Attach hoisting gear to the hoisting ears (9).
– Lift out the battery.
The re-assembly can be performed by reversing the above actions; pay attention to
the correct mounting position and battery connection.
9
D 7
040
1.G
B
5 Removing and installing the battery
– Expose the battery (refer to section 3).
f
The truck must stand horizontally. Batteries with exposed terminals or connectors
must be covered with a rubber mat to prevent short-circuits. Place battery connector
and battery cable in such a way that they do not get caught within the truck interior
when the battery is pulled out.
f
When replacing batteries, ensure that a battery of the same type is fitted. Supplemen-
tary weights may not be removed or changed in their position.
f
After reinstallation of the battery, visually check all leads and connectors for damage.
Before commissioning the truck, the battery hood must be properly closed.
A
When changing the battery with the aid of a lifting gear, ensure that the lifting gear is
of adequate capacity (the battery weight is indicated on the battery identification plate
at the battery trough). The battery must be lifted vertically to prevent crushing of the
battery trough. The hooks are to be attached to the battery hoisting ears (9) that they
cannot fall onto the battery cells when the hoisting gear is released.
5.1 Remove battery by lifting it upwards (truck without wheel-arm lifting device)
– Withdraw the battery connector.
– Attach hoisting gear to the hoisting ears (9).
– Lift out the battery.
The re-assembly can be performed by reversing the above actions; pay attention to
the correct mounting position and battery connection.
9