Jungheinrich EJC 14, Operating Instructions Manual

Page: 50 / 55

F 7
0401
.GB
5.1 Fuels, coolants and lubricants
Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
f
Improper handling is injurious to health, life, and environment. Consumption type ma-
terials must be stored in adequate containers. They might be inflammable and, the-
refore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if mi-
xing is expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption type material and binding agent is to be dis-
posed of according to the regulations.
Grease Data
Code Order-no. Supply Qty Designation Used for:
A 29 200 670 5,0 l H-LP 46, DIN 51524 Hydraulic system
B 29 200 680 5,0 l CLP 100, DIN 51517 Transmission
C 29 200 810 5,0 l H-LP 10, DIN 51524 Transmission,
hydraulic system
E 29 201 430 1,0 kg Grease, DIN 51825 Lubrication
F 29 200 100 1,0 kg Grease, TTF52 Lubrication
Code Saponification Dropp.
point ° C
Worked penetr.
at 25 ° C
NLG1 class Service tempe-
rat. ° C
E Lithium 185 265-295 2 -35/+120
F -- -- 310-340 1 -52/+100
F 7
0401
.GB
5.1 Fuels, coolants and lubricants
Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
f
Improper handling is injurious to health, life, and environment. Consumption type ma-
terials must be stored in adequate containers. They might be inflammable and, the-
refore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if mi-
xing is expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption type material and binding agent is to be dis-
posed of according to the regulations.
Grease Data
Code Order-no. Supply Qty Designation Used for:
A 29 200 670 5,0 l H-LP 46, DIN 51524 Hydraulic system
B 29 200 680 5,0 l CLP 100, DIN 51517 Transmission
C 29 200 810 5,0 l H-LP 10, DIN 51524 Transmission,
hydraulic system
E 29 201 430 1,0 kg Grease, DIN 51825 Lubrication
F 29 200 100 1,0 kg Grease, TTF52 Lubrication
Code Saponification Dropp.
point ° C
Worked penetr.
at 25 ° C
NLG1 class Service tempe-
rat. ° C
E Lithium 185 265-295 2 -35/+120
F -- -- 310-340 1 -52/+100