Jungheinrich ECR 327, Operating Instructions Manual

Page: 71 / 225

0705.USA
E 34
5 Keypad (CANCODE) (
o
)
The keypad comprises 10 number keys, a set
key, and a
o
key.
The green LED in key 1 lights up when the travel
program is active.
The operating status is indicated by a red/green
LED in the
o
key.
The keypad is used for the following functions:
– Code lock function (starting up the vehicle).
– Setting travel and battery parameters, only in conjunction with the information
display (CANDIS (
o
)).
The
o
key has the highest priority and is used to reset the vehicle to its initial state
from any other state, without changing the settings.
5.1 Code lock
The correct code must be entered before the vehicle can be used. A separate code
can be assigned to every vehicle, every operator, or to a group of operators.
NOTICE When the vehicle is delivered, the operator code (factory setting 2-5-8-0) is
indicated on a sticker.
NOTICE When the vehicle is used for the first time, change the master and operator
codes (see Section 5.4)
1 2 3
4 5 6
7 8 9
0
Set