Jungheinrich DFG 425, Operating Instructions Manual

Page: 96 / 103

F 19
02
.0
8.
GB
10.5 Cleaning/replacing the air filter cartridge
M
Carry out all maintenance work with the
motor switched off. Do not start the
motor when the air filter cartridge is
removed.
– Unscrew the clamping screw (22) and
lift up the clamp (5).
– Raise the air filter housing.
– Undo the 2 mounting clamps (23) and
remove the dust collector pot.
– Carefully remove the internal and
external air filter cartridges from the
filter housing.
– Apply dry compressed air from the
inside of the external cartridge to the
outside until no more dust emerges.
– Carefully wipe the internal cartridge
with a lint-free cloth.
M
Do not apply compressed air to the filter housing, instead wipe with a clean cloth.
– Replace any damaged or heavily contaminated air filter cartridges.
– Thoroughly clean the dust collector pot, to do this remove the rubber element.
– Insert the air filter cartridges back in the filter housing and secure them.
M
Take care not to damage the air filter cartridges when assembling.
– Insert the dust collector pot and secure it with the 2 mounting clamps (23).
– Fit the air filter housing in the assembly position.
– Attach the clamp (5) and screw on the clamping screw (22).
22 23
7
5
F 19
02
.0
8.
GB
10.5 Cleaning/replacing the air filter cartridge
M
Carry out all maintenance work with the
motor switched off. Do not start the
motor when the air filter cartridge is
removed.
– Unscrew the clamping screw (22) and
lift up the clamp (5).
– Raise the air filter housing.
– Undo the 2 mounting clamps (23) and
remove the dust collector pot.
– Carefully remove the internal and
external air filter cartridges from the
filter housing.
– Apply dry compressed air from the
inside of the external cartridge to the
outside until no more dust emerges.
– Carefully wipe the internal cartridge
with a lint-free cloth.
M
Do not apply compressed air to the filter housing, instead wipe with a clean cloth.
– Replace any damaged or heavily contaminated air filter cartridges.
– Thoroughly clean the dust collector pot, to do this remove the rubber element.
– Insert the air filter cartridges back in the filter housing and secure them.
M
Take care not to damage the air filter cartridges when assembling.
– Insert the dust collector pot and secure it with the 2 mounting clamps (23).
– Fit the air filter housing in the assembly position.
– Attach the clamp (5) and screw on the clamping screw (22).
22 23
7
5