Jungheinrich DFG 425, Operating Instructions Manual

Page: 73 / 103

0106
.GB
E 38
o
Steel cabin
If a truck is fitted with a steel cabin, both
doors can be closed.
– To unlock the cabin door turn the key
anti-clockwise.
– To lock the cabin door turn the key
clockwise.
– To open the cabin door, unlock the
door and remove the handle (53).
5.10 Towing
As the gear unit of the forklift motor is
powered, the transmission is not
lubricated and will overheat if a truck has to be towed with the motor switched off. To
avoid this, the truck can only be towed at a max. speed of 4 km per hour.
Hitch point
A rigid tow bar must be used for moving
a forklift truck.
The tow point of the truck is indicated by
(57).
Using the hitch point
– Push the tow pin (56) down and turn it
90 degrees.
– Pull the tow pin up and insert the tow
eye or tiller of the trailer vehicle into
the opening.
– Insert the tow pin, push it down, turn it 90 degrees and engage it.
Inserting the trailer coupling
M
Before coupling, the driver must ensure the maximum trailer load is not exceeded.
55
56
57
0106
.GB
E 38
o
Steel cabin
If a truck is fitted with a steel cabin, both
doors can be closed.
– To unlock the cabin door turn the key
anti-clockwise.
– To lock the cabin door turn the key
clockwise.
– To open the cabin door, unlock the
door and remove the handle (53).
5.10 Towing
As the gear unit of the forklift motor is
powered, the transmission is not
lubricated and will overheat if a truck has to be towed with the motor switched off. To
avoid this, the truck can only be towed at a max. speed of 4 km per hour.
Hitch point
A rigid tow bar must be used for moving
a forklift truck.
The tow point of the truck is indicated by
(57).
Using the hitch point
– Push the tow pin (56) down and turn it
90 degrees.
– Pull the tow pin up and insert the tow
eye or tiller of the trailer vehicle into
the opening.
– Insert the tow pin, push it down, turn it 90 degrees and engage it.
Inserting the trailer coupling
M
Before coupling, the driver must ensure the maximum trailer load is not exceeded.
55
56
57