11
0
6
.G
B
F 18
10.4
Engine servicing TFG
Checking the engine oil - TFG
– Remove the dipstick (19).
– Wipe the dipstick with a lint-free cloth
and put in back fully into its port.
– Remove the dipstick again and check
whether the oil level is between the
MIN and MAX markings.
– If the oil level is below the centre point,
remove the fuel cap (18) and add the
correct grade of oil to the engine until
the oil level has reached the MAX
mark on the dipstick.
Replacing the engine oil and engine
oil filter
Only change the engine oil when the
engine is at operating temperature and
the truck is horizontal. Always replace
the engine oil and engine oil filter
together.
Draining the engine oil
– Unscrew the (18) lid.
– Thoroughly clean the oil drain plug
(21) and around the drain hole.
– Unscrew the oil drain plug and drain
the oil into a suitable container.
F
Risk of scalding through hot oil.
– Screw in the oil drain plug with a new seal.
F
Dispose of used oil in accordance with environmental regulations.
32
31
19
20
21
18
Summary of Contents for DFG 316
