C 3
0
406
.GB
3
Using the truck for the first time
F
Commissioning and driver instruction must be performed by trained personnel. If
several trucks have been delivered, make sure that always the serial numbers of the
load lifting devices, masts and basic trucks match each other.
To prepare the truck after delivery or after transport, proceed as follows:
– Check the truck for completeness and satisfactory condition of the equipment.
– Check motor oil level.
– Check power shift transmission oil level.
– Check brake fluid level
– Check battery terminals and acid level.
– Commission the truck in accordance with instructions (see Chapter E).
4
Towing the truck
As the gear unit of the forklift motor is powered, it is not lubricated and will overheat
if a truck has to be towed with the motor switched off. To avoid this, the truck can only
be towed at a max. speed of 4 km per hour.
Hitch point
A rigid tow bar must be used for moving
a forklift truck.
The tow point of the truck is marked (57).
– Attach the tow bar / rope to the trailer coupling of the recovery vehicle and the truck
to be recovered.
– Release the parking brake.
F
One person must be seated in the towed truck to steer it. Tow the truck at crawl
speed.
Z
As the steering auxiliary unit is not applied, extra effort is required to steer the truck.
56
57
Summary of Contents for DFG 316
