E 7
0
406
.GB
3
Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
3.1
Checks and operations to be performed before starting daily work
Truck
– Visually inspect the whole of the truck (especially the wheels and the lifting device)
for obvious signs of damage.
– The entire truck (in particular wheels and load lifting devices) must be inspected for
damage.
– Make sure the load chains are evenly tensioned.
– Check the operation of the seat belt buckle and the belt returning to the retractor.
For further information see section 3.3.
3.2
Trucks with reduced headroom X (
o
)
M
Failure to comply with the recommended
body size may result in overload and
constitute a danger to the driver,
possibly resulting in permanent damage
caused by an unhealthy posture and
excessive physical exertions on the part
of the driver.
The owner must ensure that the truck
operator does not exceed the maximum
body size indicated.
The owner must also check that the
drivers can sit normally, in an upright
position without having to exert himself.
Summary of Contents for DFG 316
