E 21
0
406
.GB
4.2
Travel
F
Adapt the travel speed to the conditions of the travel lane, the work area and the load
– Set the travel direction switch (28) to neutral.
– Raise the fork carriage approx. 200 mm so that the fork tines are clear of the
ground.
– Tilt the mast fully backward:
– Release the parking brake.
Forward travel
– Set the travel direction switch (28) forward.
– Slowly apply the accelerator pedal (22) until you reach the required travel speed.
Changing direction
M
Only change direction when the truck has stopped.
– Set the travel direction switch (28) via neutral to the required direction.
– Slowly apply the accelerator pedal (22) until you reach the required travel speed.
Reversing
F
Make sure you have sufficient space to
reverse into.
– Set the travel direction switch (28) to
the rear.
Accelerating
– Slowly apply the accelerator pedal
(22) until the truck starts to move
.
– Continue to depress the accelerator
pedal.
The engine and travel speeds
increase.
Braking
F
The braking pattern of the truck depends
to a large extent on the condition of the
ground. The driver must take this into
consideration when handling the truck.
Carefully brake the truck to prevent the
load from slipping.
22
28
29
Summary of Contents for DFG 316
