E 15
11
06
.G
B
4.6
Seat
o
(XL only)
In folded-in position the seat (17) is integrated in the backrest. The folded-out seat
allows the operator a convenient position while driving and operating. The seat can
be adjusted in height and can be locked in four positions.
– Fold out seat (17), pull towards you and slide to the desired height. Lock the seat
at the desired height.
– To set a higher position, push the seat upwards and release at the desired position.
– To fold in the seat, slide it to the highest position and fold it in.
4.7
Safe parking of the truck
If the truck is left unattended, even for only short periods of time, it must be rendered
safe.
F
Never park the truck on a slope or incline. The lifting device must always be complete-
ly lowered.
– Lower the lifting device.
– Set the drive wheel to “Straight ahead”.
Control shaft steering: Set control shaft to straight position
Jet Pilot: the steering arm is set automatically to straight travel.
– Switch the key switch (14) to position “OFF” (“0”) and remove the key.
– For CANCODE, press the
o
-key.
– Depress the master switch (emergency cut-out) (1) to the “OFF” position.
17
E 15
11
06
.G
B
4.6
Seat
o
(XL only)
In folded-in position the seat (17) is integrated in the backrest. The folded-out seat
allows the operator a convenient position while driving and operating. The seat can
be adjusted in height and can be locked in four positions.
– Fold out seat (17), pull towards you and slide to the desired height. Lock the seat
at the desired height.
– To set a higher position, push the seat upwards and release at the desired position.
– To fold in the seat, slide it to the highest position and fold it in.
4.7
Safe parking of the truck
If the truck is left unattended, even for only short periods of time, it must be rendered
safe.
F
Never park the truck on a slope or incline. The lifting device must always be complete-
ly lowered.
– Lower the lifting device.
– Set the drive wheel to “Straight ahead”.
Control shaft steering: Set control shaft to straight position
Jet Pilot: the steering arm is set automatically to straight travel.
– Switch the key switch (14) to position “OFF” (“0”) and remove the key.
– For CANCODE, press the
o
-key.
– Depress the master switch (emergency cut-out) (1) to the “OFF” position.
17
Summary of Contents for 50435801
