Jungheinrich 50435801, Operating Instructions Manual

Page: 31 / 83

11
06
.G
B
E 8
4.2 Driving, steering, braking
F
Be extremely careful when driving and steering, especially when parts of the body
protrude from the truck contour.
The electric steering system is self-monitoring.
The steering control systems monitors the fault frequency over a certain period. If the
same fault is detected several times during this period, the steering control reduces
the driving speed of the truck to low speed. If such a fault occurs, the driving speed
is not reset to normal speed by switching the truck off and on again. This method pre-
vents the cancellation of a fault without eliminating the fault.
F
As the steering system is a safety-relevant component, the fault must be eliminated
by the manufacturer's service personnel.
Emergency stop
– Depress the master switch (1).
This will switch off all electric functions.
Driver standing platform switch
For all traveling functions you must stand on the platform (16).
Z
If the truck is fitted with “pedestrian-controlled operation (
o
), the following functions
can be carried out (depending on the configuration) without having to stand on the
driver platform (16):
– Travelling at a speed of approximately 4 km/h in forward (V) or reverse (R) direction
by actuating the controller (6).
– Low speed travel (approx. 2 km/h) (refer to section 4.3) by pressing the “Pedestri-
an” button (9, 11) (
o
) (as option in forward travelling direction only).
11
06
.G
B
E 8
4.2 Driving, steering, braking
F
Be extremely careful when driving and steering, especially when parts of the body
protrude from the truck contour.
The electric steering system is self-monitoring.
The steering control systems monitors the fault frequency over a certain period. If the
same fault is detected several times during this period, the steering control reduces
the driving speed of the truck to low speed. If such a fault occurs, the driving speed
is not reset to normal speed by switching the truck off and on again. This method pre-
vents the cancellation of a fault without eliminating the fault.
F
As the steering system is a safety-relevant component, the fault must be eliminated
by the manufacturer's service personnel.
Emergency stop
– Depress the master switch (1).
This will switch off all electric functions.
Driver standing platform switch
For all traveling functions you must stand on the platform (16).
Z
If the truck is fitted with “pedestrian-controlled operation (
o
), the following functions
can be carried out (depending on the configuration) without having to stand on the
driver platform (16):
– Travelling at a speed of approximately 4 km/h in forward (V) or reverse (R) direction
by actuating the controller (6).
– Low speed travel (approx. 2 km/h) (refer to section 4.3) by pressing the “Pedestri-
an” button (9, 11) (
o
) (as option in forward travelling direction only).