Jungheinrich 50435801, Operating Instructions Manual

Page: 18 / 83

C 1
11
06
.G
B
C Transportation and commissioning
1 Transportation by crane
F
Only lifting gear of adequate ca-
pacity must be used
(for the transport weight, refer to
the truck identification label).
Z
Lifting gear attachment points
are provided on the chassis (1)
and the fork (2) in case the truck
is to be lifted or transported by
crane.
– Park the truck and render it
safe (refer to chapter E).
– Open front hood (5) and put
away (refer to chapter F).
– Secure the lifting gear to the
attachment points (1) and (2).
M
The lifting gear must be at-
tached to the attachment points
in such a manner that it abso-
lutely cannot slip and cannot
come into contact with any at-
tachments of the truck when the
truck is lifted.
2 Commissioning
M
The truck must only be operated on battery current. Rectified alternate current will
damage the electronics. Cables connected to the battery (trailing cables) must be
less than 6 meters in length.
In order to prepare the truck for work following delivery or transportation, the following
operations must be performed:
– Check the truck for completeness and satisfactory condition of the equipment.
– If necessary, install the battery. Do not damage the battery cable
(refer to chapter D).
– Charge the battery (refer to chapter D).
– Commission the truck as detailed in chapter E.
Z
When the truck is parked for extended periods, the running surface of the tyres may
flatten. The flattening will disappear after a short operating time of the truck.
2
1
C 1
11
06
.G
B
C Transportation and commissioning
1 Transportation by crane
F
Only lifting gear of adequate ca-
pacity must be used
(for the transport weight, refer to
the truck identification label).
Z
Lifting gear attachment points
are provided on the chassis (1)
and the fork (2) in case the truck
is to be lifted or transported by
crane.
– Park the truck and render it
safe (refer to chapter E).
– Open front hood (5) and put
away (refer to chapter F).
– Secure the lifting gear to the
attachment points (1) and (2).
M
The lifting gear must be at-
tached to the attachment points
in such a manner that it abso-
lutely cannot slip and cannot
come into contact with any at-
tachments of the truck when the
truck is lifted.
2 Commissioning
M
The truck must only be operated on battery current. Rectified alternate current will
damage the electronics. Cables connected to the battery (trailing cables) must be
less than 6 meters in length.
In order to prepare the truck for work following delivery or transportation, the following
operations must be performed:
– Check the truck for completeness and satisfactory condition of the equipment.
– If necessary, install the battery. Do not damage the battery cable
(refer to chapter D).
– Charge the battery (refer to chapter D).
– Commission the truck as detailed in chapter E.
Z
When the truck is parked for extended periods, the running surface of the tyres may
flatten. The flattening will disappear after a short operating time of the truck.
2
1