Jungheinrich 50435801, Operating Instructions Manual

Page: 60 / 83

F 7
0307
.GB
5.1 Fuels, coolants and lubricants
Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
F
Improper handling is injurious to health, life, and environment. Consumption type ma-
terials must be stored in adequate containers. They might be inflammable and, there-
fore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if mix-
ing is expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption type material and binding agent is to be dis-
posed of according to the regulations.
Grease Data
Code Order no. Package
quantity
Model Used for
A 50449669 5,0 l H-LP 46,
DIN 51524 Hydraulic System
B 50449961 5,0 l SAE J306
75W-902 Transmission oil
C 29 200 810 5,0 l H-LP 10,
DIN 51524 Transmission,
Hydraulic System
E 29202050 1,0 kg Grease, Polylube
GA 352P Lubrication
G 29 201 280 0,4 l Chain spray Chains
Code Saponification Dew point
°
C
Worked
penetration at
25
°
C
NLG1 class Application
temperature
°
C
E Lithium >220 280 - 310 2 -35/+120
F 7
0307
.GB
5.1 Fuels, coolants and lubricants
Handling consumption type material: Consumption type material must always be
handled properly. Manufacturer's instructions to be observed.
F
Improper handling is injurious to health, life, and environment. Consumption type ma-
terials must be stored in adequate containers. They might be inflammable and, there-
fore, must not come into contact with hot components or open fire.
When filling in consumption type materials use clean containers only. It is prohibited
to mix consumption type materials of different grades or qualitiies resp., except if mix-
ing is expressively prescribed in these operating instructions.
Avoid spilling. Spilt liquid must be removed immediately using a suitable binding
agent, and the mixture of consumption type material and binding agent is to be dis-
posed of according to the regulations.
Grease Data
Code Order no. Package
quantity
Model Used for
A 50449669 5,0 l H-LP 46,
DIN 51524 Hydraulic System
B 50449961 5,0 l SAE J306
75W-902 Transmission oil
C 29 200 810 5,0 l H-LP 10,
DIN 51524 Transmission,
Hydraulic System
E 29202050 1,0 kg Grease, Polylube
GA 352P Lubrication
G 29 201 280 0,4 l Chain spray Chains
Code Saponification Dew point
°
C
Worked
penetration at
25
°
C
NLG1 class Application
temperature
°
C
E Lithium >220 280 - 310 2 -35/+120