Jungheinrich 50435801, Operating Instructions Manual

Page: 47 / 83

11
06
.G
B
E 24
Z
During the parameter input the travel function is switched off. If the setting value is to
be checked in programming mode, follow this sequence:
– Select the edited travel program after changing the parameter value, confirm with
the Set key (22).
– The truck is now in travel operation and can be checked.
– To continue the setting operation, confirm with the Set key (22) again.
The following parameters can be entered:
Travel programmes
No. Function Range
Setting value
Standard
Setting
value
Comments
Travel Programme 1
100 Acceleration in
pedestrian-controlled
operation
0 - 9 2 Value of parameter
101 >= Parameter
100
101 Acceleration in rider-
controlled operation
0 - 9 2
102 Coasting brake in rider-
controlled operation
0 - 9 3
103 Coasting brake in
pedestrian-controlled
operation
0 - 9 3 Value of parameter
103 >= Parameter
102
104 Maximum speed in drive
direction via controller
0 - 9 8 depending on
controller
105 Pedestrian-controlled
operation speed in drive
direction via controller
0 - 9 5 depending on
controller
106 Pedestrian-controlled
operation speed in drive
direction via pushbutton in
backrest
0 - 9 3 not depending on
controller (fixed
speed)
108 Maximum speed in fork
direction via controller
0 - 9 8 depending on
controller
109 Pedestrian-controlled
operation speed in fork
direction via controller
0 - 9 5 depending on
controller
110 Pedestrian-controlled
operation speed in fork
direction via pushbutton in
backrest
0 - 9 3 not depending on
controller (fixed
speed)
11
06
.G
B
E 24
Z
During the parameter input the travel function is switched off. If the setting value is to
be checked in programming mode, follow this sequence:
– Select the edited travel program after changing the parameter value, confirm with
the Set key (22).
– The truck is now in travel operation and can be checked.
– To continue the setting operation, confirm with the Set key (22) again.
The following parameters can be entered:
Travel programmes
No. Function Range
Setting value
Standard
Setting
value
Comments
Travel Programme 1
100 Acceleration in
pedestrian-controlled
operation
0 - 9 2 Value of parameter
101 >= Parameter
100
101 Acceleration in rider-
controlled operation
0 - 9 2
102 Coasting brake in rider-
controlled operation
0 - 9 3
103 Coasting brake in
pedestrian-controlled
operation
0 - 9 3 Value of parameter
103 >= Parameter
102
104 Maximum speed in drive
direction via controller
0 - 9 8 depending on
controller
105 Pedestrian-controlled
operation speed in drive
direction via controller
0 - 9 5 depending on
controller
106 Pedestrian-controlled
operation speed in drive
direction via pushbutton in
backrest
0 - 9 3 not depending on
controller (fixed
speed)
108 Maximum speed in fork
direction via controller
0 - 9 8 depending on
controller
109 Pedestrian-controlled
operation speed in fork
direction via controller
0 - 9 5 depending on
controller
110 Pedestrian-controlled
operation speed in fork
direction via pushbutton in
backrest
0 - 9 3 not depending on
controller (fixed
speed)