Channel assignment of the wall transmitter
Figure 2: Channel assignment of wall transmitter module 1-gang, 2-gang, 3-gang and 4-gang
(8) Status LED, green (one per channel)
(9) Transmission LED, red (one per device)
Operating light
o
Switching: Press button for less than 0.4 seconds.
o
Dimming: Press the button for longer than 0.4 seconds. The dimming process ends when
the button is released.
o
Switching on dimmer actuators at minimum brightness: Press the right button for longer
than 0.4 seconds.
o
Switching on dimmer actuators at minimum brightness and dimming to maximum
brightness: Press the left button for longer than 0.4 seconds.
Operating blind
o
Moving the Venetian blind: Press the button for longer than 1 second.
o
Stopping the Venetian blind or adjusting the slats: Press the button for less than 1 second.
Operating push-button actuator
o
Press the left or right button of a channel: The load is switched on for the duration of the
button-press.
i
The maximum actuation length is 60 seconds.
Recalling scenes
o
Press the scene button briefly.
Actuators switching to the saved scene.
Changing scene
o
Press the scene button briefly.
Actuators switching to the saved scene.
o
Setting a new scene.
o
Press scene button for longer than 4 seconds.
Actuators first switching to the old scene and save the new scene after 4 seconds.
3/10
32595513
J0082595513
22.03.2017
eNet radio transmitter module
