i
The actuator causing the transmission error can be removed from the display of
transmission errors. To do this, briefly press the top left (10) and bottom right (11) buttons
of the wall transmitter simultaneously during the signalling. The transmission LED lights up.
During this time, do not press any button on the wall transmitter. The actuator is
automatically taken into account again when it transmits a status message after radio
transmission.
After a button has been pressed, the status LED flashes red quickly for 3 seconds.
Cause: Maximum permitted transmission period (statutory Duty Cycle Limit) has almost been
reached. For the function of the transmitter to continue, the polling and display of the sum status
will be switched off. As soon as sufficient transmission time is available again, the sum status
will again be polled on button actuation.
Actuate the transmitter again after a short waiting time, normally a few seconds.
Reduce the number of actuations.
Reduce the number of actuators connected to the transmitter.
6.4 Accessories
Cover kit 1-gang
Art. No. ..501TSA..
Cover kit 2-gang
Art. No. ..502TSA..
Cover kit 3-gang
Art. No. ..503TSA..
Cover kit 4-gang
Art. No. ..504TSA..
6.5 Conformity
Albrecht Jung GmbH & Co. KG hereby declares that the radio system type
Art. No. FM..5001M / FM..5002M / FM..5003M / FM..5004M
corresponds to the directive 2014/53/EU. You can find the full article number on the device. The
complete text of the EU Declaration of Conformity is available under the Internet address:
www.jung.de/ce
6.6 Warranty
The warranty follows about the specialty store in between the legal framework as provided for
by law.
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
GERMANY
Telefon: +49 2355 806-0
Telefax: +49 2355 806-204
[email protected]
www.jung.de
10/10
32595513
J0082595513
22.03.2017
eNet radio transmitter module
