C
Q
E
F
M
G
D
B
H
11
C
Safety Net assembly
Two people required for assembly.
Step 6
Attach “End Cap” Q to the “Lower Frame Tube with No Foam” C making sure it is fitted at the
correct end as shown.
Attach the “Lower Frame Tube with No Foam” C to the leg frame, using the “U-screw” D , “Gap
Spacer” G and secure with the “Clamp” E and the “Lock Nut” F as shown.
Hint: Don’t tighten all lock nuts at once. Tighten all the lock nuts at the end of Step 7.
Step 7
Attach the “Middle Frame Tube with Foam” B to the “Lower Frame Tube with No Foam” C .
Screw in the “Self-Locking Screw (Small)” H as shown. Do not tighten fully at this point.
After all the U-screws have been assembled, tighten all lock nuts. Put the “Nut Cover” M onto the
“Lock Nut” F to avoid injury.
Please note that only the lower U-screws need to be covered.
Repeat step 1 and 2 for all frame tube sets and tighten all the nuts.
Note: The Lower “U-screw” should be placed about 30 cm from the ground, while the Upper
“U-screw” should be placed right above the end of the “Leg Socket” (80 cm from the ground).
2
9
