L
K
K
Step 12
First, tie the end of one “Cord” K to the Trampoline Mat ribbon. Then pull the cord through the
corresponding hole on the net as shown. Repeat this step until you have tied all the “Cord” K to
the Trampoline Mat ribbon and tie both ends together.
Step 13
Pull the zip of the “Netting” L at the door which should be located within one leg base of the
Trampoline, then snap the two buckles together as shown.
Step 14
Important: Remember to go back and tighten all screws, nuts and buckles on both the Trampoline
and the Enclosure Netting. Otherwise it may not function properly and may lead to injuries that
could have been avoided by proper assembly.
The assembly of the trampoline is now complete. Remember to be careful when jumping.
12
