Net Assembly
1.
Stretch Net Assembly (1) out. Locate
the panel with the doorway and align
the net as to where you would like to
get in and out of the trampoline. The
edge with the pre-sewn hanging loop is
the upper part of the net and will be
hooked at the top of the pole. (See
Figure 1)
2.
In line to each of the pre-sewn loop at the
net top, there are a row of sewn-in velcro
closings, three velcro closings in line.
Attach these velcro closings securely to
each of the pole. Adjust the net to make
sure the velcro closings are securely
fastened. (See Figure 2)
3.
At the other edge of the net, there are
elastic straps which are used to secure
the bottom part of the net to the
Trampoline. Pull the bottom of the net
down to the trampoline using the elastic
straps and wrap them over the
Trampoline Top Rail Tube and hook
them to the Mat’s V-ring as shown in
Figure 3.
Page:
8
Summary of Contents for 84-0263
Page 5: ...EXPLODED VIEW Page 5 ...
