manualshive.com logo in svg

JumpTek 84-0263, Assembly, Installation, Care, Maintenance, And Use Instructions

Share
Download
JumpTek 84-0263 Assembly, Installation, Care, Maintenance, And Use Instructions Download Page 3

ASSEMBLY AND INSTALLATION INSTRUCTIONS 

   

WARNING

 

 

z

 

Adequate overhead clearance is essential. A minimum of 24ft (8m) from ground 

level is recommended. Provide clearance for wires, tree limbs, and other possible 

hazards. 

 

z

 

Lateral clearance is essential. Place the trampoline and trampoline enclosure 

away from walls, structures, fences, and other play areas. Maintain a clear space 

on all sides of the trampoline and trampoline enclosure. 

 

z

 

Place the trampoline and trampoline enclosure on a level surface before use. 

 

z

 

Use the trampoline and trampoline enclosure in a well-lighted area. Artificial 

illumination may be required for indoor or shady areas. 

 

z

 

Secure the trampoline and trampoline enclosure against unauthorized and 

supervised use. 

 

z

 

Remove any obstructions from beneath the trampoline and trampoline enclosure. 

 

z

 

The trampoline enclosure is only to be used as an enclosure for a trampoline of a 

size for which the enclosure is designed. 

 

 

 

 

 

 

 

 

 

 

 

 

   

 Page: 

3 

Summary of Contents for 84-0263






















Reviews:

No comments

Brands by name

Popular brands

Load more brands