JUMO TYA S201, Operating Manual, Page: 42 / 92

4 Operation
42 V1.00/EN/00709718 [Thyristor power switch TYA S201]
4.1.1 Display and control elements
and can be used to view the current measured values such as cur-
rents, actual voltage values, load resistance setpoint value, device tempera-
ture, and power.
This information is also displayed in the diagnosis window for the setup pro-
gram.
v
Chapter 7 "Setup Programm"
4.1.2 Appearance of measured values
Overview of
measured val-
ues At this level, the designation of the measured value is displayed in the top line,
and the numerical value together with the unit is displayed in the middle.
The info line shows the selected input (with terminal designation), and the op-
erating mode.
It is also used to display temporary states (e.g. error messages).
v
Chapter 8 "Fehlermeldungen und Alarme"
Legend Comment Diagram
1
The Power LED (green) lights up permanently when the voltage
supply is connected.
Flashes at regular intervals if the display lighting is switched off.
v
Chapter 9 "Was tun, wenn ..."
2 Display (96 x 64 pixels) with white background lighting. The in-
formation line at the bottom of the display shows the current
settings and error messages.
3 The Fuse LED (red) lights up if the semiconductor fuse is defec-
tive
4 K1 LED (yellow) fault indicator
5 Keys:
Increase value / previous parameter
Decrease value / next parameter
Cancel / one level back
Programming / one level forward
6 USB setup interface
7 Spring clip to release the plastic housing
v
Chapter 8.2 "Defekte Halbleitersicherung austaus-
chen"
(1) (2)
(3)
(4)
(5)
(7)
(6)
TYA S201
Designation
Measured value
Info line or error