manualshive.com logo in svg

JUMO 202560, Operating Instructions Manual, Page: 82 / 104

Share
Download
JUMO 202560 Operating Instructions Manual Download Page 82

82

9 Setup program

9.1

Function

Configurable 
parameters

The setup program (available as an option) can be used for easy adaptation of
the instrument to the requirements.

- Setting the measurement range and the range limits.

- Setting the response of the outputs to an out-of-range signal.

- Setting the functions of the switching outputs K1 and K2.
- Setting the function of the binary input E1.
- Setting up special functions (e.g. tables for specific linearizations).
- etc.

Connection

Data transmission from or to the transmitter can only take place
when it is connected to the electrical supply, see Chapter 4
“Electrical connection”, page 12ff.

The setup interface is not electrically isolated.

When connecting the PC interface cable with a TTL/RS232 
converter and adapter (serial connection cable) (70/00350260) , it 
is therefore absolutely essential to ensure that the supply for either 
the transmitter or the PC is not electrically earthed (for instance: 
use a battery-powered notebook).

The PC interface cable with USB/TTL converter (USB connection 
cable) (70/00456352) is, however, electrically isolated.

PC interface with USB/TTL converter

(USB connection cable)

(70/00456352)

All manuals and user guides at all-guides.com

Summary of Contents for 202560









































































































Reviews:

No comments