ENGLISH
14
OPERATION
Power supply
Connect the device to a mains supply of 230 V ~ 50 Hz. The battery is only used as a backup for the
memory.
Radio function
1.
Set the function selector in the ON position to start the device.
2.
Set the band selector in the FM or AM position.
3.
Turn the volume knob to the required volume.
4.
Set the required frequency with the knob.
5.
Set the function selector in the OFF position to switch off the device.
Setting the time
1.
To set the hour, first press the time button and then press the hour button until the required hour is
shown. Release both buttons.
2.
To set the minute, first press the time button and then press the minute button until the required
minute is shown. Release both buttons.
Waking up with radio or buzzer
1.
Select the radio station and volume.
2.
Press in the alarm button while also pressing the hour button until the required hour is shown.
3.
Press in the alarm button while also pressing the minute button until the required minute is shown.
4.
Set the function selector in AUTO position. The AUTO lamp goes on. The radio will switch on at the
set time.
5.
To wake up with the buzzer instead of the radio, switch off the volume with the volume knob.
6.
To switch off the radio or buzzer, set the function selector in the OFF position or press the alarm
button.
Snooze function
When the buzzer or radio goes on you can switch off the sound for a short while with the snooze button.
The AUTO lamp flashes. The buzzer or radio will go on again after about 9 minutes. To switch off the
snooze function, set the function selector in the OFF position or press the alarm button.
Going to sleep with the radio on
1.
Select radio station.
2.
Set the function selector in the AUTO or OFF position.
3.
Press the sleep button. The character display shows 59 minutes as the dropping off to sleep time.
You can reduce the sleep time by pressing in the sleep button and then pressing the minute button.
You can set the falling asleep time to up to 1 hour and 59 minutes by pressing in the sleep button and
then pressing the hour button once. The radio plays during the set time and then switches off
automatically. You can switch off the radio before the set time has run out by pressing the snooze button.
Projection function
Press the projection button once to activate projection of the time. Press once again to turn the projected
image. Press once again to switch off the projection. Adjust the focus with the knob.
Dimmer
Set the dimmer control in the HI position to increase the brightness in the character display, and in the LO
position to reduce the brightness.
Aerial
The device has a built-in ferrite rod aerial for the AM band. The aerial is directionally sensitive. You can
therefore turn the device to improve reception. The FM radio also has a cable aerial on the back. Pull it
out as far as possible for best reception.