ENGLISH
14
Replacing the grinding wheel
1.
Unplug the machine from the mains supply.
2.
Remove the outer covers on the left and right side of the machine.
3.
While holding the grinding wheel in a tight grip, loosen the nut with a spanner and then remove the
flange.
NOTE!
The left nut has a left thread and the right nut is right-threaded.
4.
Remove the old grinding wheel and put the new wheel in place.
5.
Put the flange in place, tighten the nut and fit the covers.
6.
Let the machine run for a minute and check that the wheel is not out of balance
