ENGLISH
13
TECHNICAL DATA
Mains voltage
220 – 230 V/50 Hz
Rated output
150 W
Nominal operating time
S2 (30 minutes)
Safety class
I
Protection level
Ordinary
Sound pressure level, LpA
63 dB(A), K= 3 dB
Sound power level, LwA
76 dB(A), K= 3 dB
Always use hearing protection!
The declared vibration and noise value, which has been measured by a standardised test method, can be
used to compare different tools with each other and for a preliminary assessment of exposure. The
measurement values have been determined in accordance with EN 61029-2-4:2011.
Warning:
The actual vibration and noise level when using power tools may differ from the specified
maximum value, depending on how the tool is used and what kind of workpiece is processed. It is
therefore necessary to determine which safety precautions are required to protect the user,
based on an estimate of exposure in actual operating conditions (taking into account all stages of the
work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the start-up
time).
DESCRIPTION
A.
Protective glass.
B.
Tool rest.
C.
Power switch.
D.
Tool rest holder.
E.
Cover.
F.
Power switch On/Off.
1.
MOTOR
. The motor is single phase and has insulation class E. The motor casing is made of
aluminium or cast iron.
2.
COVER.
The cover is made of sheet steel and protects against splashes and sparks. The
protective glass is also fitted to the cover.
3.
GRINDING WHEELS
.
4.
POWER SWITCH
.
5.
POWER CORD WITH PLUG
. The power cord has 3 conductors, 1 of which is an earth conductor.
6.
CAPACITOR
.
OPERATION
1.
Wait until the machine reaches maximum speed after start-up before you begin working.
2.
Adjust the protective glass so you can clearly see what you are doing.
3.
Adjust the tool rest to the appropriate angle for the particular job, and according to the tool you are
using.
