Jula 242-115, Operating Instruction

Page: 76 / 77

ENGLISH
76
Carbon brushes
If strong arcing occurs, contact an electrician to check the carbon brushes.
Warning: The carbon brushes must only be replaced by an authorised service technician.
Replacing the power cord
If the machine's power cord is damaged it must be replaced by the manufacturer, their customer service
or other qualified service personnel.
TRANSPORT

Tighten the locking screw (12) to lock the turntable (18).

Press the locking lever (3), press the machine head (4) downwards and lock with the lock pin (28).
The saw is now locked in the downward position.

Fix the saw in the rear position with the guide locking screw (26).

Carry the machine holding the fixed saw table (19) or the base, if the saw is mounted on one.

Follow the instructions to install the machine again.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
Jula Postorder AB, Box 363, SE-532 24 SKARA, SWEDEN
www.jula.com