Jula 242-115, Operating Instruction

Page: 60 / 77

ENGLISH
60

Applicable regulations for the prevention of accidents must be followed closely. Other general
medical and safety instructions must be followed.

Modifications to the machine void the manufacturer's liability for any damage caused by the
machine. It is not possible to completely eliminate all risk factors even if the machine is used as
intended. The design of the machine gives rise to the following risks:
-
The saw blade can be touched where it is not covered.
- Hands can come into contact with the blade when it is rotating (cuts).
- Kickback can cause machine to be thrown back from the workpiece or parts of the workpiece
can be thrown.
- Blade breakage.
- Parts of the tungsten carbide saw blade can be ejected.
- Hearing impairment can occur if ear protection is not worn.
- Harmful dust can collect when the machine is used in enclosed spaces.
TECHNICAL DATA
Rated voltage 230 V/50 Hz
Output power 1500 W (S1)
Idling speed 5000 rpm
Saw blade Ø 210 x Ø 25.4 x 2.8 mm
No. of teeth 24
Cutting angle
-45

/ 0

/ +45

Mitre gauge
0

-45

to the left and right
Cutting depth 90

310 x 62 mm
Cutting depth 45

215 x 62 mm
Cutting depth at 2 x 45

215 x 36 mm
Sound pressure level, L
pA
93 dB(A), K=3
Sound power level, L
wA
104 dB(A), K=3
Laser class 2
Laser wavelength 650 nm
Laser power 1 mW
Weight
Vibration level a
h
11.5 kg
2.44 m/s²
Wear hearing protection!
The declared vibration value, which has been measured by a standardised test method, can be used to
compare different tools with each other and for a preliminary assessment of exposure.
WARNING!
The actual vibration level when using power tools may differ from the specified maximum value,
depending on how the tool is used. It is therefore necessary to determine which safety precautions are
required to protect the user, based on an estimate of exposure in actual operating conditions (taking into
account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in
addition to the start-up time).
DESCRIPTION
See Illustrations 1-4
1. Handle
2. Power
switch
3. Locking lever
4. Machine head
5. Saw spindle catch
6. Moving blade guard
7. Saw blade
8. Clamping device
9. Adjustable stop with locking
screw
10. Support for the workpiece
11. Stop rail
12. Locking screw
13. Base
14. Table
arm
15. Locking handle
16. Indicator
17. Scale
18. Turntable
19.
Fixed saw table
20. Locking screw
21. Indicator
22. Scale
23. Laser
24. Dust
bag
25. Guide
26.
Locking screw for guide
27. Lock pin for incline 0°-45° to the
right
28. Lock pin
29. Locking screw for support of the
workpiece
30. Support
31. Saw
depth stop
32. Cutting depth set screw
33. Power switch for laser
34. Extractor adapter
35. Hex key