－
31
－
6-2. Sewing using the combination function (cycle sewing)
This sewing machine can perform sewing of plural sewing pattern data in one cycle in the order of the data.
As many as 99 patterns can be input. Use this function for sewing two or more different patterns on the sewing
product. In addition, registration of as many as 99 cycles can be performed. Copy and use the data to fill the
needs.
→
Refer to
"I.6-5. Copying or deleting various kinds of pattern data" p.38.
(1) Selection of cycle data
1) Set the mode to the input mode.
Under the input mode where SET READY LED
goes out, selection of the cycle data is en-
abled.
If the current mode is the sewing mode, press
READY key
❷
to change over the mode
to the input mode.
Only under the input mode, selection of the cycle
data is enabled.
❻
❷
2) Select cycle stitching data.
Press ITEM SELECT key
❻
, and patterns which have been registered are changed over and dis-
played in order. Cycle data No. and continuous stitching data No. which have been registered after the
last registered pattern No. are displayed. Here, select the cycle data No. which you desire to sew.
3) Perform sewing.
When READY key
❷
is pressed in the state where the cycle data is selected, SET READY LED
lights up to show that the sewing is enabled.
Cycle data No. 1 only has been registered at the time of your purchase. However, sewing status cannot
be obtained since the sewing pattern has not been inputted. Perform inputting of sewing pattern referring
to
(2) Method of editing cycle data
on the next page.
(2) Method of editing cycle data
1) Set the mode to input mode.
Under the input mode where SET READY LED
goes out, entry of the cycle data is enabled.
If the current mode is the sewing mode, press
READY key
❷
to change over the mode
to the input mode.
2) Set cycle data to editing status.
When EDIT key
❽
is pressed, the cycle
data editing display
C
appears on the screen.
The pattern No.
D
to be sewn is displayed in
reverse video.
In this state, it is possible to edit the data.
C
D
❻
❷
❼
❸
❾
❽
