JUKI DP-2100, Instruction Manual

Page: 7 / 187

−
1
−
Sewing speed Max. 3,500 rpm (*1)
Feed system Intermittent belt feed by direct drive of stepping motor
Stitch length Both top and bottom 1.5 to 6 mm
Stitch length adjustment system Panel input
Stitch length adjustment minimum resolution 0.1 mm
Needle bar stroke 30.7 mm
Needle DPX17 #10 to #14
Hook Full-rotary non-lubricated horizontal-axis hook
Presser foot lift By hand lifter : 5.5 mm, by auto-lifter : 10 mm
Amount of alternate vertical movement of Max. 3.5 mm
presser foot/walking foot
Adjustment of amount of alternate vertical Slot stop position adjustment
movement of presser/walking foot
Lubrication Non-lubrication
Number of programs that can be inputted 99 programs
Number of steps that can be inputted (per program) 30 steps
Data mirroring Provided
Right/left alternate sewing Possible
Data record Smart media
Noise Workplace-related noise at sewimg speed
n=3,000 min -1 : L
PA
≦ 84dB(A)
Noise measurement according to DIN 45635-48-A-1
1. SPECIFICATIONS
1-1 Specifications of the machine head
Limitation by the amount of alternate vertical movement of presser and walking foot
Limitation by stitch length
Max. sewing speed (rpm) Stitch length (mm)
3,500 1.5 to 4.0
2,500 4.1 to 6.0
1-2 Specifications of the control box
*1. The maximum sewing speed is limited in accordance with the amount of alternate vertical movement of
presser foot and walking foot, and stitch length.
Max. sewing speed (rpm) Amount of vertical movement of Amount of vertical movement of
walking foot (mm) presser foot (mm)
3,500 Less than 0.3 (2.7)
2,600 Not less than 0.3 to 1.5 (1.5)
2,000 Not less than 1.5 to 2.5 (2.5)
1,600 Not less than 2.5 to 3.5 (3.5)
Power voltage 3-phase 200V/220V/240V Single phase 220V/230V/240V
Frequency 50Hz/60Hz
Rated current 2.6A/2.4A/2.2A 2.8A/2.6A/2.5A
Operating
temperature/
0 to 40˚C, Less than 90%
humidity