JUKI DP-2100, Instruction Manual, Page: 127 / 187

−
121
−
5) S e l e c t C o m p e n s a t i o n t e n s i o n
automatic setting.
Press UP/DOWN SCROLL buttons
3
to select Compensation thread tension
automatic button
7
. Compensation tension
mode selection screen is displayed.
6) Set the compensation thread tension automatic
value.
1. Press SHIRRING AMOUNT RANGE SETTING
button
8
of LV.1 to input the upper limit of
the shirring amount range of LV. 1 with ten keys
!7
.
2. N e x t , p r e s s C O M P E N S A T I O N T H R E A D
TENSION SETTING button
9
of LV.1 to
input the compensation thread tension value of LV.
1 with ten keys
!7
.
Similarly, input the value of LV.2, LV.3, LV.4 and
LV.5 with buttons,
8
to
!6
.
Setting example on the left-hand illustration is :
• In case shirring amount is – 4 to 5, compensation
thread tension is – 3.
• In case shirring amount is 6 to 10, compensation
thread tension is +5.
• In case shirring amount is 11 to 15, compensation
thread tension is +11.
• In case shirring amount is 16 to 20, compensation
thread tension is +21.
• In case shirring amount is 21 to 35, compensation
thread tension is +28.
* When the setting is completed, press ENTER
button
!8
to close the compensation tension
automatic setting screen. And, the screen returns
to the memory switch list screen.
* When MODE key
!9
is pressed, the data
input screen is displayed.
* In case the compensation thread tension automatic
is selected, even when STEP DETAILS SETTING
button
@0
is pressed and the step details
screen is opened, the compensation thread tension
setting button is not displayed.
7
!8
3
7
9
!2
!4
!6
!5
!3
8
!1
! 0
!9
@0
!7