JUKI DP-2100, Instruction Manual

Page: 144 / 187

−
138
−
1
2
17-1 Observing the maintenance and inspection information
17. INFORMATION FUNCTION
There are three functions below in the information function.
1) Oil replacement (grease-up) time, needle replacement time, cleaning time, etc. can be specified and the
warning notice can be performed after the lapse of the specified time.
Refer to "17-1 Observing the maintenance and inspection information" and "17-2 Inputting
the maintenance and inspection time" .
2) Speed can be checked at a glance and the target achieving consciousness as a line or group is increased
as well by the function to display the target output and the actual output.
Refer to "17-4 Observing the production control information" and "17-5 Performing setting
of the production control information" .
3) Information on machine working ratio, pitch time, machine time and machine speed can be displayed
from the working state of the sewing machine.
Refer to "17-6 Observing the working measurement information" .
1) Display the information screen.
When information key
1
of the switch seat
section is pressed in the data input screen, the
information screen is displayed.
2) Display the maintenance and inspection
information screen.
P r e s s m a i n t e n a n c e a n d i n s p e c t i o n
informationscreen display button
2
in the
information screen.